The AU-H101A is a small-size HDMI 2.0 audio de-embedder with 1 HDMI input, 1 HDMI output, and three different types of audio outputs. It is designed to extract audio from a HDMI signal via stereo balanced L/R audio, analog RCA, and coaxial digital audio output. It also features an HDMI equalizer to ensure full HDMI signal integrity is maintained. The AU-H101A can compensate for poor source signals or low-quality cabling at the end of a long cable run. EDID and CEC pass-through ensures that the source video is at the optimal resolution for the display and can be controlled by CEC from source. KEY FEATURES: • De-embeds analog audio and coaxial digital audio from an HDMI signal. • HDMI equalization. • Three selectable audio modes. • 4K@60Hz (4:4:4) and data rates up to 18 Gbps. • HDMI 2.0 and HDR support. • HDCP 2.2/1.4 support. • EDID and CEC pass-through.
The DA-H4A-DS is an HDMI 2.0 compatible 1x4 auto scaling HDMI distribution amplifier. It supports automatic down scaling so a 4K video input can be down scaled to an 1080p output when connecting a display that only supports resolutions up to 1080p for maximum compatibility in installations with mixed resolution displays. The DA-H4A-DS supports 4K signals up to 4K@60Hz 4:4:4 and features an easy EDID management option using dip switches on the front panel of the unit. Audio can be de-embedded from the HDMI input and outputted as balanced analog audio or digital optical SPDIF. KEY FEATURES: • Supporting resolutions up to 4K@60Hz, 4:4:4 (18 Gbps). • Supports HDR formats such as Dolby Vision. • Balanced analog and digital optical audio outputs for de-embedded audio. • Auto down scaling for maximum compatibility with mixed resolution displays. • Signal equalizer for longer HDMI runs. • Supports cascading up to 6 units. • Input supporting HDCP 2.2, outputs supporting HDCP active or passive mode. • EDID Management and CEC pass-through.
The The HDBase-T Classroom Kit is a multi-function AV system designed to provide HDMI video switching, system control, video extension and analog audio amplification, all in one convenient kit for classrooms and meeting spaces. The system consists of an HDBaseT transmitter wall plate with two HDMI inputs, a receiver with built in audio amplification and a simple wall plate control panel. Audio and 4K video is transported over a single solid core CAT cable between the wall plate transmitter and the receiver. The wall plate control panel provides the customer with an easy to use control interface without use of programming. All power needed for the system is provided by the receiver. Additionally, the receiver features a built-in web GUI for control. The WEB GUI also supports user and administrator privileges. A user login only provides the control page that can be reached from any device with a web browser. KEY FEATURES: • Two HDMI inputs can be switched freely. • HDMI video resolution up to 4K@60Hz 4:2:0. • Extends 4K@60Hz 4:2:0 signal up to 40m and 1080p@60Hz signal up to 70m via a single CATx cable. • USB extension for interactive whiteboard connection. • HDCP 2.2. • Analog MIC/Line input. • 2 x 20 Watt@4Ohm amplifier output. • Customizable control panel, supports IR learning. • Copy and load IR and RS232 control settings. • WEB GUI control.
The EXT-AU313-TP is an audio extender set that includes one transmitter and one receiver. It is designed to extend a stereo analog audio signal up to 170 m and extend an Optical/Coax digital audio up to 290 m via a CATx cable. The EXT-AU313-TP is ideal to extend unbalanced or digital audio from a source to an audio system located far from the source. KEY FEATURES: • Three selectable audio inputs: Optical, Coax and Analog Stereo. • Audio will be outputted simultaneous to the three different outputs: Optical, Coax and Analog Stereo. • Convert audio signals from digital into analog, or analog into digital. • Supply power only at the receiver end -the transmitter is powered over the CATx cable (PoC). • The transmission distance of analog stereo audio can up to 170 m, and the digital Optical/Coax audio up to 290m over an CATx cable.
The EXT-H101L2-RX-HDBT is a fully 18G HDMI 2.0b compliant HDBaseT receiver. It receives HDMI audio, video as well as control up to 70m using a single Category 6A solid core cable (4K 60Hz 40m / 1080P 60Hz 70m) from a compatible HDBaseT transmitter. Supports HDMI 2.0b, HDR and HDCP 2.2. The EXT-H101L2-RX-HDBT provides crystal clear HDR and full bandwidth 4K video in a compact formfactor. This receiver supports automatic downscaling from 4K to 1080P without refresh rate change for easier installation when mixing 4K and 1080P displays. Support for bi-directional PoC allows for easy installation by applying power to either the transmitter or the receiver end. Features: Compact formfactor Supports HDMI 2.0b, 4K@60 4:4:4, HDR, HDCP 2.2. 4K HDMI signal extension up to 40m, and 1080p is 70m. Supports 4K to 1080p auto downscaling. Supports CEC, IR, and RS232 pass-through. Supports bi-directional 24V PoC for simplified installations.
The EXT-H101L2-TX-HDBT is a fully 18G HDMI 2.0b compliant HDBaseT transmitter. It extends HDMI audio, video as well as control up to 70m using a single Category 6A solid core cable (4K 60Hz 40m / 1080P 60Hz 70m) to a compatible HDBaseT receiver. Supports HDMI 2.0b, HDR and HDCP 2.2. The EXT-H101L2-TX-HDBT provide crystal clear HDR and full bandwidth 4K video in a compact formfactor. Support for bi-directional PoC allows for easy installation by applying power to either the transmitter or the receiver end. Features Compact formfactor Supports HDMI 2.0b, 4K@60 4:4:4, HDR, HDCP 2.2. 4K HDMI signal extension up to 40m, and 1080p is 70m. Supports CEC, IR, and RS232 pass-through. Supports bi-directional 24V PoC for simplified installations.
UNCOMPRESSED 18G HDMI 2.0 EXTENDER SET OVER HDBT3 WITH USB 2.0 AND 1G ETHERNET | The EXT-H102UETH-HDBT is a high−performance HDBaseT 3.0 extender set for un-compressed 4K60Hz 4:4:4 HDMI, USB 2.0, Ethernet, RS−232 and IR signals. It supports and can extend HDMI 2.0b, HDCP 2.3 and HDR video up to 100m over a single Category 6A solid core cable. HDBaseT 3.0 standard allows for fully un compressed 18G HDMI signal, 1G Ethernet and improved USB2.0 bandwidth to be extended. Support for bi-directional PoC allows for easy installation by applying power to either the transmitter or the receiver. This extender set is ideal for various applications like conference rooms, education and anywhere where high-quality video, Gigabit Ethernet and/or USB2.0 extension is required.
The MSW-H412AC-DS is a 4x2 HDMI 2.0 matrix supporting resolutions up to 4K60 4:4:4. The matrix features three HDMI 2.0 inputs and one USB-C input that also provides up to 60W of power delivery to the connected USB-C source. It has two HDMI 2.0 outputs that supports 4K to 1080P automatic downscaling eliminating the need for a separate scaler when mixing 4K and 1080P displays. The unit also features an independent audio matrix with volume control and delay settings per output. The MSW-H412AC-DS supports various control options, front panel, IR, RS232, TCP/IP and WEB-UI. It comes fully packed with extensive configuration and settings options to make the installation go smoothly and integrate easily with any application. KEY FEATURES • Supports HDMI 2.0b, 4K@60Hz 4:4:4, HDR 10, Dolby Vision and HDCP 2.3. • 3 x HDMI Inputs, 1 x USB-C Input, 2 x HDMI Outputs • Provides up to 60w Power Delivery on USB-C input. • Features an independent audio matrix. • Supports 4K auto downscaling to 1080p on HDMI outputs. • Extensive EDID management, and HDCP management on input and output side. • Supports CEC control for devices connected on inputs and outputs • Various control options: Front panel, RS232, IR remote, TCP/IP and WEB UI.
The SW-H411A allows selection of four different sources (three HDMI inputs and one DisplayPort input) and will switch the selected video to the HDMI output. The audio is simultaneously de-embedded to an optical digital audio output and a balanced analog audio output. It supports video resolutions up to 4K x 2K@60Hz 4:4:4 8bit, 1080P, and 3D. In addition, there is a smart built-in EDID setting that can be selected by the 4-pin DIP switch on the rear panel. The SW-H411A supports stereo and multichannel audio on the HDMI inputs. In addition to the audio embedded in the HDMI output stream, the audio is simultaneously de-embedded to an optical digital audio output and a balanced analog audio output. This switcher also features user friendly automatic switching and display control - no need for a separate control system. The switcher can also be manually controlled by the front panel buttons, IR remote, TCP/IP and RS232 command. The SW-H411A features a web UI for configuration and control. The Web UI can be set up to accessed from anywhere for easy support. KEY FEATURES: • Supports HDMI 2.0 and resolutions up to 4K@60Hz 4:4:4 8bit, 1080P, and 3D. • 18Gbps bandwidth and supports HDR10, HDR10+, Dolby Vision. • HDCP 2.3 compliant. • Video source auto-switching. • Automatic display control via CEC or RS232. • CEC control for display volume and ON/OFF. • Controllable via TCP/IP, RS232, IR. • Open API for third party control via TCP/IP and RS232. • Web UI for control and configuration. • Optical and balanced analog audio for audio de-embedding. • Smart EDID management for various application and customized setting.
The SW-H411AU-BYOD is a presentation system that supports both wired and wireless BYOD content sharing. Besides the wireless content sharing, the 4x1 BYOD switcher offers two HDMI 2.0 inputs and one USB-C input ideal for the latest MacBooks and PCs with 60W of charging power. This presentation system also features user friendly automatic switching and display control - no need for a separate control system. USB peripherals in the room can be shared to the active source such as USB cameras, USB microphones or keyboard and mouse which makes the SW-H411AU-BYOD ideal to use in meeting rooms. KEY FEATURES: • Wireless BYOD (Bring Your Own Device) capability via AirPlay and Miracast. • Supports HDMI 2.0b, 4Kx2K@60Hz 4:4:4, HDR 10, Dolby Vision and HDCP 2.2. • Video source auto-switching. • USB sharing, two type-B USB ports for host connection, and two type-A USB ports for USB devices like camera, microphone, and keyboard. • Provide up to 60w charging, USB data (USB 3.0/2.0) and 4K video transmission on USB-C port. • Automatic or manual display control via CEC or RS232 commands. • Open API for third party control via RS-232. • HDMI output audio can be de-embedded out via balanced analog audio port. • Smart EDID management and UI for configuration.
USB-C TO 18G HDMI2.0 CONVERTER WITH USB AND ETHERNET | The VC-C101U-ETH converts 4K@60Hz 4:4:4(max) DisplayPort alt mode signal over USB-C video input to 4K@60Hz 4:4:4(max) HDMI 2.0 video output. For the USB-C input interface, it also supports USB 3.1 Gen2 data transfer, Gigabit LAN and 60W fast-charging. The converter includes three USB 3.1 device ports and one Ethernet Gigabit LAN port. Features Input supports DisplayPort Alt mode up to 4K@60Hz 4:4:4 using DisplayPort 1.4 (DisplayPort 1.2 is limited to 4K@30Hz 4:4:4). Output supports HDMI 2.0, 4K@60Hz 4:4:4. HDCP 2.3 support. USB-C input supports 60W USB Power Delivery. Supports USB3.1 Gen2 (up to10Gbit/s) data transfer via USB-C. 3x USB 3.1 device ports for camera, keyboard and mouse. Ethernet Gigabit LAN pass-through via USB-C No software drivers required - Plug and Play.