TiGHT AV

U

The The HDBase-T Classroom Kit is a multi-function AV system designed to provide HDMI video switching, system control, video extension and analog audio amplification, all in one convenient kit for classrooms and meeting spaces. The system consists of an HDBaseT transmitter wall plate with two HDMI inputs, a receiver with built in audio amplification and a simple wall plate control panel. Audio and 4K video is transported over a single solid core CAT cable between the wall plate transmitter and the receiver. The wall plate control panel provides the customer with an easy to use control interface without use of programming. All power needed for the system is provided by the receiver. Additionally, the receiver features a built-in web GUI for control. The WEB GUI also supports user and administrator privileges. A user login only provides the control page that can be reached from any device with a web browser. KEY FEATURES: • Two HDMI inputs can be switched freely. • HDMI video resolution up to 4K@60Hz 4:2:0. • Extends 4K@60Hz 4:2:0 signal up to 40m and 1080p@60Hz signal up to 70m via a single CATx cable. • USB extension for interactive whiteboard connection. • HDCP 2.2. • Analog MIC/Line input. • 2 x 20 Watt@4Ohm amplifier output. • Customizable control panel, supports IR learning. • Copy and load IR and RS232 control settings. • WEB GUI control.

The SW-H411A allows selection of four different sources (three HDMI inputs and one DisplayPort input) and will switch the selected video to the HDMI output. The audio is simultaneously de-embedded to an optical digital audio output and a balanced analog audio output. It supports video resolutions up to 4K x 2K@60Hz 4:4:4 8bit, 1080P, and 3D. In addition, there is a smart built-in EDID setting that can be selected by the 4-pin DIP switch on the rear panel. The SW-H411A supports stereo and multichannel audio on the HDMI inputs. In addition to the audio embedded in the HDMI output stream, the audio is simultaneously de-embedded to an optical digital audio output and a balanced analog audio output. This switcher also features user friendly automatic switching and display control - no need for a separate control system. The switcher can also be manually controlled by the front panel buttons, IR remote, TCP/IP and RS232 command. The SW-H411A features a web UI for configuration and control. The Web UI can be set up to accessed from anywhere for easy support. KEY FEATURES: • Supports HDMI 2.0 and resolutions up to 4K@60Hz 4:4:4 8bit, 1080P, and 3D. • 18Gbps bandwidth and supports HDR10, HDR10+, Dolby Vision. • HDCP 2.3 compliant. • Video source auto-switching. • Automatic display control via CEC or RS232. • CEC control for display volume and ON/OFF. • Controllable via TCP/IP, RS232, IR. • Open API for third party control via TCP/IP and RS232. • Web UI for control and configuration. • Optical and balanced analog audio for audio de-embedding. • Smart EDID management for various application and customized setting.

The SW-H411AU-BYOD is a presentation system that supports both wired and wireless BYOD content sharing. Besides the wireless content sharing, the 4x1 BYOD switcher offers two HDMI 2.0 inputs and one USB-C input ideal for the latest MacBooks and PCs with 60W of charging power. This presentation system also features user friendly automatic switching and display control - no need for a separate control system. USB peripherals in the room can be shared to the active source such as USB cameras, USB microphones or keyboard and mouse which makes the SW-H411AU-BYOD ideal to use in meeting rooms. KEY FEATURES: • Wireless BYOD (Bring Your Own Device) capability via AirPlay and Miracast. • Supports HDMI 2.0b, 4Kx2K@60Hz 4:4:4, HDR 10, Dolby Vision and HDCP 2.2. • Video source auto-switching. • USB sharing, two type-B USB ports for host connection, and two type-A USB ports for USB devices like camera, microphone, and keyboard. • Provide up to 60w charging, USB data (USB 3.0/2.0) and 4K video transmission on USB-C port. • Automatic or manual display control via CEC or RS232 commands. • Open API for third party control via RS-232. • HDMI output audio can be de-embedded out via balanced analog audio port. • Smart EDID management and UI for configuration.

The VSB-600AF is an all-in-one conferencing soundbar in a compact design, with 4K@30fps video resolution and a built-in 6-mic array. The VSB-600AF supports AEC, ANS and AGC and supports up to 6-meters full-duplex high-quality conferencing calls. It uses and AI algorithm integrated with multiple AI framing technologies enabling the unit to automatically frame the participants in the meeting and adjusts the picture to present the best view. The VSB-600AF supports USB 3.0 over a USB type B port, while also supporting USB 2.0. No driver install is necessary - simply plug it in and open your video conferencing application. The unit comes with a wall bracket for mounting on a wall, or it can be placed on a flat surface standing on its built-in stand. A 5m USB 2.0 cable is also included.

The SW-H411AU-BYOD is a presentation system that supports both wired and wireless BYOD content sharing. Besides the wireless content sharing, the 4x1 BYOD switcher offers two HDMI 2.0 inputs and one USB-C input ideal for the latest MacBooks and PCs with 60W of charging power. This presentation system also features user friendly automatic switching and display control - no need for a separate control system. USB peripherals in the room can be shared to the active source such as USB cameras, USB microphones or keyboard and mouse which makes the SW-H411AU-BYOD ideal to use in meeting rooms. KEY FEATURES: • Wireless BYOD (Bring Your Own Device) capability via AirPlay and Miracast. • Supports HDMI 2.0b, 4Kx2K@60Hz 4:4:4, HDR 10, Dolby Vision and HDCP 2.2. • Video source auto-switching. • USB sharing, two type-B USB ports for host connection, and two type-A USB ports for USB devices like camera, microphone, and keyboard. • Provide up to 60w charging, USB data (USB 3.0/2.0) and 4K video transmission on USB-C port. • Automatic or manual display control via CEC or RS232 commands. • Open API for third party control via RS-232. • HDMI output audio can be de-embedded out via balanced analog audio port. • Smart EDID management and UI for configuration.

DSP control panel with encoder and OLED display. Programmable control panel with encoder and OLED display, for use with the 10x10 DSP Dante

The 2x2 Dante is a network audio interface allowing users to integrate up to 2x2 audio channels of Dante audio into networked AV systems. Each input features a microphone preamplifier and 48V phantom power option. The 2x2 Dante features PoE power capability and local power. A small form factor and included mounting ears makes it easy to add Dante connectivity wherever it is needed. It can be close to the audio source or sink to eliminate the need for costly and interference-prone analog wiring.

Plug-and-Play PoE Dante Interface | AU-BT2-DA from TiGHT AV allows for transmitting two channels of Bluetooth audio to your Dante network and simultaneously receiving one channel of Dante Audio. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. The AU-BT2-DA is a simple and cost-efficient solution to integrate wireless Bluetooth audio to and from a Dante network. Simply pair your device via the button on the adapter, and you are ready to play audio from your device or allow for migrating mobile calls to your Dante-enabled conference system. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2x1 audio channels -Bluetooth 5.0 support -Maximum Bluetooth LoS transmission distance up to 20m -Bluetooth paring button on front •Dante and AES67 support •24-bit audio support •Supports 802.3af PoE •Dante Controller and Dante Domain Manager compatible

Featuring bi-directional Bluetooth audio, the interface allows you to transmit two channels of Bluetooth audio onto the Dante network, and simultaneously receive one Dante channel. The paring is as simple as pressing a button on the front panel, and you can give the unit any friendly name you like. Need more I/O? No problemo. Additional inputs and outputs are available via unbalanced RCA and TRS mini-jack connectors on the front panel. On the setup side, audio routing and control is maintained via Dante Controller and Domain Manager. A web UI handles the configuration of the device itself, with an open API for third-party control. The AU-BT413WP-DA is perfect for simple BYOD, or you could use the call bridging feature for conference calls utilizing the existing audio equipment in the room.