Sennheiser SL DI4 XLR | Analog digital audio converter, 4x MIC/LINE, Dante

Beklager-dette produktet er ikke lenger tilgjengelig

The SL DI 4 XLR four input Dante preamp is the ideal interface for for wireless microphone receivers, and adding mic/line inputs to a Dante system.
Loading...
Fabrikant: Sennheiser
LydRommet SKU: 650-00325
Fabrikantens SKU: 506848

Overview

The SL DI 4 XLR four input Dante preamp is the ideal interface for wireless microphone receivers, and adding mic/line inputs to a Dante system. The small form factor to the SL DI 4 XLR allows them to be mounted almost anywhere, putting them close to audio sources and minimizing interference-prone analog wiring. The SL DI 4 XLR features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The SL DI 4 XLR has two network connections to allow Dante Daisy Chaining. Dante Daisy Chaining further simplifies system infrastructure wiring by allowing multiple SL DI 4 XLRs to use a single CAT 5 home run connection to a network switch. Power can also be daisy chained. The SL DI 4 XLR is powered by either external +12VDC or any PoE network switch. All adjustable parameters, like mic/ line gain and phantom power, are software controlled.


Features

  • 4 XLR balanced and RF filtered mic/line inputs

  • Gain is individually adjustable per channel via software

  • 802.3af compliant PoE powered to work with any compliant PoE network switch, or an external +12VDC supply

  • +48V Phantom power - powers virtually all types of phantom powered microphones typically used in installed AV systems.

  • Phantom power is switchable per channel via software

  • ID LED allows easy identification of the SL DI 4 XLR

  • Dante Daisy Chaining allows multiple SL DI 4 XLRs to be

  • connected over a single home-run to the Ethernet switch


What's in the box?

  • SL DI 4 XLR

Overview

The SL DI 4 XLR four input Dante preamp is the ideal interface for wireless microphone receivers, and adding mic/line inputs to a Dante system. The small form factor to the SL DI 4 XLR allows them to be mounted almost anywhere, putting them close to audio sources and minimizing interference-prone analog wiring. The SL DI 4 XLR features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The SL DI 4 XLR has two network connections to allow Dante Daisy Chaining. Dante Daisy Chaining further simplifies system infrastructure wiring by allowing multiple SL DI 4 XLRs to use a single CAT 5 home run connection to a network switch. Power can also be daisy chained. The SL DI 4 XLR is powered by either external +12VDC or any PoE network switch. All adjustable parameters, like mic/ line gain and phantom power, are software controlled.


Features

  • 4 XLR balanced and RF filtered mic/line inputs

  • Gain is individually adjustable per channel via software

  • 802.3af compliant PoE powered to work with any compliant PoE network switch, or an external +12VDC supply

  • +48V Phantom power - powers virtually all types of phantom powered microphones typically used in installed AV systems.

  • Phantom power is switchable per channel via software

  • ID LED allows easy identification of the SL DI 4 XLR

  • Dante Daisy Chaining allows multiple SL DI 4 XLRs to be

  • connected over a single home-run to the Ethernet switch


What's in the box?

  • SL DI 4 XLR
Anders Nannestad
SALG
Tlf: 23 23 28 11
Mob: 91 74 82 31

Technical Data

  • Power consumption
    500 mA
  • Phantom powering
    P 48
  • Power supply
    12 V DC
    • Powering
      12V DC or 802.3af PoE
    • Communication
      Dante Interface
    • Connection
      Audio In: 4x XLR3F Ethernet / Dante ™: 2x RJ 45 (1x with PoE) PowerLink: 2x 2pole connector
*
*
*
Filtrer
Sort
display