produktbilde
produktbilde
produktbilde
produktbildeproduktbildeproduktbilde
Artikkelnummer: JBL-AWC82-BK

JBL All Weather Compact, 8" coax, 120x120 horn, 250W, sort

All Weather Compact høyttaler med et godt avstivet glassfiberkabinett Tåler et røft miljø. Direkte tilkopling (8ohm), eller via 200W/100V trafo.

Veil. pris: Kr 5 810,- eks. mva. Veil. pris: Kr 7 263,- inkl. mva. Netto: Kr 5 810,- eks. mva.
4 på lager
Frekvensbånd:
Farge:
Øystein Johnsen

Øystein Johnsen

SALG

  • Produkttekst
  • Spesifikasjoner
  • Datablader

Høyttaleren har IP56 klassifisering som gjør den egnet  både utendørs og innendørs i miljøer med høy luftfuktighet.

8 coax med 120 graders spredning og kevlarforsterket membran gir lav forvrengning og kontrollert direktivitet. Høyttaleren egner seg meget godt til tale, men har nok bass til at den også fungerer til musikk. Pulverlakkert U-monteringsbrakett er inkludert.

Frequency Range (-10 dB) 80 Hz – 20 kHz
Frequency Response (±3 dB) 100 Hz – 20 kHz
Coverage Pattern 120° x 120°
Directivity Factor (Q) 8.1 (1 k – 16 kHz)
Directivity Index (DI) 8.4 dB (1 k – 16 kHz)
Long-Term System Power Rating (IEC) 250 W 2 hrs.
200 W 100 hrs
Sensitivity (2.83V @ 1m) 94 dB (Ave. 100 Hz – 20 kHz)
Maximum SPL Direct 8Ω: 118 dB (peaks of 124 dB)
200 W Tap: 117 dB
Crossover Network 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order
low-pass to LF
Nominal Impedance 8 ohms
Transformer Taps 70V: 200W, 100W, 50W, 25W
100V: 200W, 100W, 50W
Low Frequency Driver Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
High Frequency Driver 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
HF Driver Protection Minimum audibility SonicGuard™ HF overload protection
Enclosure ABS with Glass enclosure, heavily braced
Attachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
Grille Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Input Connection CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
Environmental IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs).
Dimensions 300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet
331 mm (13.0 in) including gland nut
359 mm (14.2 in) including bracket extending to back
Colors Available in gray (similar to Pantone 420C) and black (-BK)
Net Weight 9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Shipping Weight 14.1 kg (31.0 lb)
Included Accessories U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.

Det finnes ingen relaterte produkter.