König & Meyer

Sorter etter

K&M 26740 | Stativ for studiomonitorer

310-00203
Stable steel stand for monitors with broad completely level round cast-iron base-diameter 450 mm. Rod combination height adjustable using clamping screw and safety splint. For the direct attachment of monitors with 3/8" threaded joint (thread length 12 mm) or to screw in a connector plate 205 x 245 mm for Genelec monitor 1030 or monitors by other manufacturers. Includes 4 thread points and 4 rubber knobs.

K&M 26750 | høyttalerstativ 1100-1810mm, 35mm rør

310-00183
Space-saving speaker stand with a large, flat cast-iron base (ø 450 mm). The solid steel construction impresses with its stability and supports speakers weighing up to 35 kg when the load is centred. For optimal sound reinforcement height, 100 mm steps can be set between 930 and 1430 mm. The slim clamp with safety hook is easy and comfortable to use. The end tube has a diameter of 35 mm and is therefore suitable for all corresponding flange bushings. The range of applications can be extended with a variety of accessories such as a projector tray (26747), mounting adapter (19580), etc.

K&M 26772 | bordstativ for små studiomonitorer

310-00305
Attractive table stand for studio monitors and loudspeakers. The height adjustment is variable between 167 and 254 mm. 4 rubber pads each for floor and tray provide for stability and noise filtration. The recommended max. load is 15 kg. The support area (tray) dimensions are 150 x 170 mm.

K&M 26773 | bordstativ for studiomonitorer, "Z-stand", par, grå

310-00230
Two stylish and durable table stands for studio monitors and speakers. The set is available in white, black and gray. The height of the stands is 253 mm. 4 rubber pads each for base and support plate provide non-slip stand and sound absorption. The maximum recommended load is 15 kg. The respective support plate measures approx.150 x 180 mm and the stable steel stands have an individual weight of 3 kg.

K&M 26773 | bordstativ for studiomonitorer, "Z-stand", par, hvit

310-00229
Two stylish and durable table stands for studio monitors and speakers. The set is available in white, black and gray. The height of the stands is 253 mm. 4 rubber pads each for base and support plate provide non-slip stand and sound absorption. The maximum recommended load is 15 kg. The respective support plate measures approx.150 x 180 mm and the stable steel stands have an individual weight of 3 kg.

K&M 26773 | bordstativ for studiomonitorer, "Z-stand", par, sort

310-00228
Two stylish and durable table stands for studio monitors and speakers. The set is available in white, black and gray. The height of the stands is 253 mm. 4 rubber pads each for base and support plate provide non-slip stand and sound absorption. The maximum recommended load is 15 kg. The respective support plate measures approx.150 x 180 mm and the stable steel stands have an individual weight of 3 kg.

K&M 26774 | bordstativ for større studiomonitorer

310-00201
Attractive table stand for studio monitors and loudspeakers. The height adjustment is variable between 167 and 254 mm. 4 rubber pads each for floor and tray provide for stability and noise filtration. The recommended max. load is 15 kg. The support area (tray) dimensions are 230 x 250 mm.

K&M 26775 | bordstativ , topplate 205x245mm, 25kg

310-00461
Height-adjustable desktop stand for near-field monitors. The solid metal construction with the large support plate (205 x 245 mm) is suitable for a wide range of monitors and other equipment in the same size range. Four felt-covered support pads provide decoupling under the base plate. The individual height can be adjusted in 6 steps between 350 and 500 mm. In terms of load capacity, the stand can be centrally loaded up to 25 kg. Rubber pads are included for secure, noise-insulating support of the monitors

K&M 26776 | bordstativ med 12.5° tilt, topplate 230x250mm, 25kg

310-00463
Height-adjustable desktop stand with tilt support. The solid metal construction with the large support plate (230 x 250 mm) is suitable for a wide range of monitors and other equipment in the same size range. The plate can be continuously tilted up to 12.5° and can be moved to optimise the centre of gravity. A stop bar ensures the necessary safety and prevents the monitor from slipping. Four felt-covered support pads provide decoupling under the base plate. The individual height can be adjusted in 4 steps between 350 and 450 mm. In terms of load capacity, the stand can be centrally loaded up to 25 kg. Rubber pads are included for secure, noise-insulating support of the monitors.

K&M 26777 | bordstativ med klemme , topplate 205x245mm, 25kg

310-00460
Height-adjustable monitor stand with table clamp for near-field monitors. The solid metal construction with the large support plate (205 x 245 mm) is suitable for a wide range of monitors and other equipment in the same size range. A practical table clamp allows it to be attached to tabletops with a thickness of 10 to 52 mm. The individual height adjustment is possible in 6 steps between 335 and 485 mm. In terms of load capacity, a centric load of up to 25 kg is possible. The support plate can be rotated 360° for perfect alignment. Rubber pads are included for secure, noise-insulating support of the monitors

K&M 26778 | bordstativ med klemme og 12.5° tilt, topplate 230x250mm, 25kg

310-00462
Height-adjustable monitor stand with table clamp for near-field monitors. The solid metal construction with the large support plate (230 x 250 mm) is suitable for a wide range of monitors and other equipment in this size range. The plate can be tilted continuously up to 12.5° and moved to optimise the centre of gravity. A stop bar ensures the necessary safety and prevents the monitor from slipping. The practical table clamp enables attachment to tabletops with a thickness of 10 to 52 mm. The individual height can be adjusted in 4 steps between 335 and 435 mm. In terms of load capacity, a centric load of up to 25 kg is possible. The support plate can be rotated 360° for perfect alignment. Rubber pads are included for secure, noise-insulating support of the monitors.

K&M 26782 | TV-stativ

310-00353
Modern screen stand with a flat steel base. The supplied mounting accessories allow VESA standard mounting for flat screens from 24" to 46". In the large dimensioned tube combination, cables are accommodated in a space-saving and organized manner. Height adjustment is made in steps using an ergonomic spring-loaded clamping knob.

K&M 26785 | Design monitor stand H 1,100 - 1,700 mm

310-00450
This stable elegant stand has a 420 x 420 mm cast base with an oversized rod combination. Gradual height adjustment is made by a superior positioning and clamping knob. Quick, uncomplicated mounting of the monitor is accomplished using the suspension device.

K&M 26791 | Design monitor stand  H 644 - 1044 mm

310-00452
Impressive steel stand for monitors with stable, elegant cast base 480 x 480 mm. The large-dimensioned tube combination is gradually height adjustable by means of a spring-loaded clamping knob from 644 to 1044 mm. Depending on the size of the monitor, three different bearing plates 26792 can be mounted.

K&M 26792 | Design monitor stand topplate 240 x 200 mm

310-00454
Bearing plate for monitors, suitable for the design monitor stand 26795. Includes 4 spikes and 4 rubber knobs

K&M 26792 | Design monitor stand topplate 320 x 280 mm

310-00455
Bearing plate for monitors, suitable for the design monitor stand 26795. Includes 4 spikes and 4 rubber knobs.

K&M 26792 | Design monitor stand topplate 420 x 380 mm

310-00456
Bearing plate for monitors, suitable for the design monitor stand 26795. Includes 4 spikes and 4 rubber knobs.

K&M 26793 | Design monitor stand adapter til 35 mm rør

310-00457
Adapter for design monitor stand 26795 to mount audio monitors and loudspeakers with 36 mm flange bushing. Comes with 2 fastening screws

K&M 26795 | Design monitor stand H 794 - 1344 mm

310-00453
Impressive steel stand for monitors with stable, elegant cast base 480 x 480 mm. The large-dimensioned tube combination is gradually height adjustable by means of a spring-loaded clamping knob from 794 to 1344 mm. Depending on the size of the monitor, three different bearing plates 26792 can be mounted.

K&M 28075 | Stativ for mindre miksebord

310-00304
Heavy duty stand for amplifiers and mixers. Foldable. Spring-loaded locking bolt and locking screw. Felt-lined supporting brackets.
Close
Filtrer etter Fjern alle
Kategorier
Filtrer
Sort
display