JBL CSS H30 hornhøyttaler for tale, 30W, 8 ohm+70/100V, IP65

The Commercial Solutions Series CSS-H30 Paging Horn provides excellent voice range clarity for public address systems, announcement/paging, intercom, security, alarm and industrial applications.
Loading...
Fabrikant: JBL
LydRommet SKU: 808-00508
Fabrikantens SKU: CSS-H30
Spesifikasjoner for produktene

Designed for demanding environmental conditions, the CSS-H30 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The focused coverage pattern allows the horn to project the sound a farther distance than is the case with wider-coverage paging horns. Typical applications for this product are public access areas, warehouses, factories, schools, recreational facilities, commercial buildings, distribution centers, civic centers, and other commercial sound and protectivesignaling systems.

Features

  • Excellent voice range clarity for announcement and paging.
  • High sensitivity delivers high sound levels with minimal power amplification.
  • Focused 50° horizontal by 70° vertical coverage for long throw capability.
  • Phenolic diaphragm driver for outdoor durability and high reliability.
  • UL-registered 30-watt multi-tap transformer, with 8 ohm direct bypass.
  • Built-in high-pass filter enhances reliability by protecting against low frequency damage.
  • Highly weather-resistant, with stainless steel bracket and hardware.

Applications

  • Public Access Areas
  • Warehouses
  • Factories
  • Schools
  • Recreational Facilities
  • Commercial Buildings
  • Distribution Centers
  • Civic Centers
  • Other Commercial Sound and Protective Signaling Systems

Designed for demanding environmental conditions, the CSS-H30 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The focused coverage pattern allows the horn to project the sound a farther distance than is the case with wider-coverage paging horns. Typical applications for this product are public access areas, warehouses, factories, schools, recreational facilities, commercial buildings, distribution centers, civic centers, and other commercial sound and protectivesignaling systems.

Features

  • Excellent voice range clarity for announcement and paging.
  • High sensitivity delivers high sound levels with minimal power amplification.
  • Focused 50° horizontal by 70° vertical coverage for long throw capability.
  • Phenolic diaphragm driver for outdoor durability and high reliability.
  • UL-registered 30-watt multi-tap transformer, with 8 ohm direct bypass.
  • Built-in high-pass filter enhances reliability by protecting against low frequency damage.
  • Highly weather-resistant, with stainless steel bracket and hardware.

Applications

  • Public Access Areas
  • Warehouses
  • Factories
  • Schools
  • Recreational Facilities
  • Commercial Buildings
  • Distribution Centers
  • Civic Centers
  • Other Commercial Sound and Protective Signaling Systems

Øystein Johnsen
SALG
Tlf: 23 23 28 07
Mob: 91 53 73 13
Frequency Response (-10 dB)380 Hz – 6 kHz
Coverage Pattern50° horizontal by 70° vertical (at 2 kHz and averaged 1 kHz – 4 kHz)
Included High-Pass FilterPassive 350 Hz high-pass filter built-in to protect against damage from frequencies below operational range.
Directivity Factor (Q)15.8 (2 kHz)
Directivity Index (DI)12 (2 kHz)
System Power Rating30 W (120 W peak), 100 hrs.
Sensitivity (1W, 2.83V@ 1m)108 dB, ave. 1 kHz – 6 kHz
112 dB at 1.4 kHz
Maximum SPL (1m)123 dB cont ave. (129 dB peak), 1 kHz – 6 kHz ,
127 dB cont ave. (133 dB peak), 1.4 kHz, 30W input,
8 ohm Setting
Nominal Impedance30W/70V, NC/100V tap: 167 ohms
15W/70V, 30W/100V tap: 333 ohms
7.5W/70V, 15W/100V tap: 667 ohms
3.8W/70V, 7.5W/100V tap: 1333 ohms
1.9W/70V, 3.8W/100V tap: 2666 ohms
8 ohms at 8 ohm direct setting
Transformer Taps 70V: 30W, 15W, 7.5W, 3.8W, 1.9W
100V: 30 W, 15W, 7.5W, 3.8W
Driver38 mm (1.5 in) diameter with phenolic diaphragm
Horn MaterialABS
Mounting HardwareStainless steel powder-coated U-bracket (yolk) with 3 x 10.4 mm (0.41 in) dia mounting holes, stainless steel exterior hardware.
ColorRAL9016 (horn and bracket)
Input Connection300 mm (12 in) pigtail to bare wire , entrance via watertight fitting. Wire colors: red = positive (+) , black = negative (-).
EnvironmentalIP-65 rating per IEC529, salt spray per B117, stainless steel U-bracket and exterior hardware.
Safety AgencyTransformer UL Registered per UL1876 “Isolating Signal and Feedback Transformers for Use in Electronic Equipment”
Dimensions (H x W x D)206 x 285 x 287 mm (8.2 x 11.2 x 11.3 in) horn
224 x 285 x 287 mm (8.9 x 11.2 x 11.3 in) including mounting bracket. Depth excludes cable exit.
Weight (ea)4.5 lb/2.0 kg
Shipping Weight (ea)6.0 lb/2.7 kg
Included AccessoriesStainless steel mounting bracket
Spesifikasjoner for produktene
*
*
*
Filtrer
Sort
display