JBL Control 47CT PL | takinnfellingshøyttaler, 8 ohm og 100/70V, 120 gr spredning

Y
Loading...
Fabrikant: JBL
LydRommet SKU: 801-00302
Fabrikantens SKU: Control 47C/T
Spesifikasjoner for produktene

The system features the same great sonic character and wide 120° of coverage as the Control 47C/T and is perfect for settings ranging from restaurant and retail to large casinos and beyond. The Control 47LP is a premium in-ceiling professional loudspeaker designed for applications that require extremely wide bandwidth along with very consistent coverage. Ideal for small and large projects alike, the Control 47LP is switchable for use as either an 8-ohm low-impedance speaker, or as part of a 70V/100V distributed loudspeaker system.

Features

  • Shallow Backcan Version of 47C/T for locations with limited clearance
  • Same Sonic Signature as Control 47C/T Allows Mixing & Matching of mode
  • Proprietary Conical RBI® Technology Provides Wide, Consistent Coverage
  • Flat Frequency Response and Superior Performance
  • Elegant design fits any décor

 

The system features the same great sonic character and wide 120° of coverage as the Control 47C/T and is perfect for settings ranging from restaurant and retail to large casinos and beyond. The Control 47LP is a premium in-ceiling professional loudspeaker designed for applications that require extremely wide bandwidth along with very consistent coverage. Ideal for small and large projects alike, the Control 47LP is switchable for use as either an 8-ohm low-impedance speaker, or as part of a 70V/100V distributed loudspeaker system.

Features

  • Shallow Backcan Version of 47C/T for locations with limited clearance
  • Same Sonic Signature as Control 47C/T Allows Mixing & Matching of mode
  • Proprietary Conical RBI® Technology Provides Wide, Consistent Coverage
  • Flat Frequency Response and Superior Performance
  • Elegant design fits any décor

 

Øystein Johnsen
SALG
Tlf: 23 23 28 07
Mob: 91 53 73 13
Frequency Range55 Hz - 20 kHz
Power Capacity150W program, 75W pink noise
Sensitivity91 dB, 1W, 1m
70V/100V Taps 60W, 30W, 15W (7.5W at 70V only)
Coverage120° conical, consistent broadband
Nominal Impedance8 ohms
Component6.5 inch (135 mm) woofer, 1" tweeter
TerminationScrew-down removable locking clip-in connector
Included AccessoriesC-rings, tile rails, paint shield, cutout template, Grille
Suspension TabsThree, on top panel
Dimensions
(Diameter x Depth)
305mm Diameter x 259mm Diameter Depth (12.0 in x 10.2 in)
Spesifikasjoner for produktene
*
*
*
Kunder som kjøpte dette produktet, kjøpte også...

AKG WMS470 | hodebøylesystem med C544L, bånd 7 | 500 - 530 MHz

700-43507
WMS470 is a professional multichannel wireless microphone system with pilot tone transmission to prevent unwanted noise.

AKG WMS470 | håndholdt system med C5, bånd 8 | 570 - 600 MHz

700-43208
WMS470 is a professional multichannel wireless microphone system with Pilot tone transmission to prevent unwanted noise.

TiGHT AV AU-BT2-DA | Dante-adapter, 2X1 Bluetooth

670-00043
Plug-and-Play PoE Dante Interface | AU-BT2-DA from TiGHT AV allows for transmitting two channels of Bluetooth audio to your Dante network and simultaneously receiving one channel of Dante Audio. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. The AU-BT2-DA is a simple and cost-efficient solution to integrate wireless Bluetooth audio to and from a Dante network. Simply pair your device via the button on the adapter, and you are ready to play audio from your device or allow for migrating mobile calls to your Dante-enabled conference system. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2x1 audio channels -Bluetooth 5.0 support -Maximum Bluetooth LoS transmission distance up to 20m -Bluetooth paring button on front •Dante and AES67 support •24-bit audio support •Supports 802.3af PoE •Dante Controller and Dante Domain Manager compatible
Filtrer
Sort
display