JBL Control 45CT | 5.25" takinnfellingshøyttaler, 8 ohh/100/70V, 120 gr spredning

The Control 45C/T is a premium in-ceiling professional loudspeaker designed for applications that can benefit from extremely wide bandwidth and very consistent coverage from a ceiling speaker with a small footprint.
Fabrikant: JBL
LydRommet SKU: 801-00301
Fabrikantens SKU: Control 45C/T
Spesifikasjoner for produktene
Størrelse5,25"
Lenke til vår leverandør:https://jblpro.com/en-US/products/control-45c-t
The large backcan on the Control 45C/T, along with the LF driver design, provides extended bass response for a warm full-bodied tone. The system’s 130mm (5.25 in) woofer features a polypropylene cone and pure butyl rubber surround for long life. The coaxially mounted 20 mm (0.75 in) soft dome features ferrofluid cooling for enhanced power handling and reduced power compression. Ideal for small and large projects alike, the Control 45C/T is switchable for use as either an 8-ohm low-impedance speaker, or as part of a 70V/100V distributed loudspeaker system.

Features

  • Extremely consistent 120° broadband pattern control featuring JBL’s exclusive conical Radiation Boundary Integrator® (RBI™) technology.
    • Very consistent, full-range coverage of listening area while providing a small ceiling footprint.
    • Wide, consistent coverage requires fewer speakers, reducing the cost of the installed system without
       sacrificing performance.
  • Coaxial design featuring:
    • 130 mm (5.25 in) polypropylene-coated paper cone with butyl rubber surround.
    • 20 mm (.75 in) soft-dome tweeter on 210 mm (8.25 in) diameter wave guide.
  • Bass extension down to 55 Hz.
  • 8 ohm and 70V/100V operation.
  • Integrated backcan for easy “blind-mount” install. Packaged with grille and tile rails for easy installation.
The large backcan on the Control 45C/T, along with the LF driver design, provides extended bass response for a warm full-bodied tone. The system’s 130mm (5.25 in) woofer features a polypropylene cone and pure butyl rubber surround for long life. The coaxially mounted 20 mm (0.75 in) soft dome features ferrofluid cooling for enhanced power handling and reduced power compression. Ideal for small and large projects alike, the Control 45C/T is switchable for use as either an 8-ohm low-impedance speaker, or as part of a 70V/100V distributed loudspeaker system.

Features

  • Extremely consistent 120° broadband pattern control featuring JBL’s exclusive conical Radiation Boundary Integrator® (RBI™) technology.
    • Very consistent, full-range coverage of listening area while providing a small ceiling footprint.
    • Wide, consistent coverage requires fewer speakers, reducing the cost of the installed system without
       sacrificing performance.
  • Coaxial design featuring:
    • 130 mm (5.25 in) polypropylene-coated paper cone with butyl rubber surround.
    • 20 mm (.75 in) soft-dome tweeter on 210 mm (8.25 in) diameter wave guide.
  • Bass extension down to 55 Hz.
  • 8 ohm and 70V/100V operation.
  • Integrated backcan for easy “blind-mount” install. Packaged with grille and tile rails for easy installation.
Øystein Johnsen
SALG
Tlf: 23 23 28 07
Mob: 91 53 73 13
Frequency Range (-10 dB) 55 Hz – 20 kHz
Frequency Response (+/-3 dB)80 Hz – 17 kHz
Power Capacity 150 Watts Continuous Program Power
75 Watts Continuous Pink Noise
Nominal Sensitivity (2.83V/1m)88 dB
Nominal Coverage Angle120° conical coverage
Directivity Factor (Q)5.6
Directivity Index (DI)7.3 dB
Rated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peak
Rated Impedance8 ohms (in bypass mode)
Transformer Taps 60W, 30W, 15W, (& , 7.5W @ 70V)
Transformer Insertion Loss0.76 dB @ 60W, 0.70 dB @ 30W, 0.61 dB @ 15W, 0.58 dB @ 7.5W
LF Driver130 mm (5.25 in) polypropylene-coated paper cone with butyl rubber surround, 25 mm (1 in) copper voice coil, vented fiberglass resin voice coil former.
HF Driver20 mm (0.75 in) soft-dome, neodymium magnet assembly, ferro-fluid cooling, aluminum voice coil former.
Input ConnectorsTwo removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm).
Key: 1) + in, 2) - in, A)+ loop thru, B) - loop thru
KnockoutsTwo (top, and side)
Safety AgencySuitable for use in air handling spaces per UL1480 Speakers for Fire Alarm, Emergency and Commercial and Professional Use, complies with UL-2043 Fire Tests for Heat and Visible Smoke Release for Discrete Products, CUL, NFPA-70, NFPA- 90A Installation of Air Conditioning and Ventilation Systems. In accordance with the requirements of IEC60849/EN60849.
Dimensions250 mm (9.9 in) diameter, 239 mm (9.4 in) mounting depth
Cutout Size220 mm (8.75 in)
Ceiling Thickness RangeAccommodates tiles / drywall up to 70 mm (2.75 in) thick
Net Weight3.9 kg (8.6 lb)
Shipping Weight8.6 kg (19.0 lb), pair pack
Included AccessoriesC-ring support backing plate, 2 tile support rails (fits both 2 x 4 ft or 600 x 1200 mm tiles), press-in grille, knockout strain relief, cutout template, paint shield, 2 removable locking multi-pin connectors.
Optional AccessoriesMTC-26NC New Construction Bracket
MTC-26MR Mud Ring Construction Bracket
Spesifikasjoner for produktene
Størrelse5,25"
Lenke til vår leverandør:https://jblpro.com/en-US/products/control-45c-t
*
*
*
Filtrer
Sort
display