JBL Control 29AV | 8" og horn, 8ohm/70V/100V, hvit

The Control 29AV-1 provides improved voicing for extremely flat, high-fidelity performance, extended bandwidth and well-controlled defined coverage from a compact loudspeaker
Loading...
Fabrikant: JBL
LydRommet SKU: 801-00121
Fabrikantens SKU: C29AV-WH-1
Spesifikasjoner for produktene

The rotatable high-frequency horn allows use of the speaker in either vertical or horizontal orientation. Consistent coverage ensures excellent sound character throughout the listening area. Moderate magnetic shielding allows use of the speaker as close as 230 mm (9) to video monitors. The top-quality line distribution transformer, designed for minimal insertion loss and reduced saturation, allows use of either 70V or 100V distributed speaker lines. In bypass position, the 8Ω impedance allows use of multiple speakers on a loudspeaker line. 

Features

  • Extended bandwidth, extremely smooth frequency response.
  • 110° x 85° HF coverage, rotatable horn.
  • 110 W transformer for 70 V or 100 V lines, with 8 ohm thru.
  • SonicGuard™ overload protection.
  • 200 mm (8 in) Kevlar cone woofer,
    25 mm (1 in) titanium diaphragm compression driver.
  • Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and
    optional U-bracket.
  • Sealed input panel cover and screwdown input terminals.

The rotatable high-frequency horn allows use of the speaker in either vertical or horizontal orientation. Consistent coverage ensures excellent sound character throughout the listening area. Moderate magnetic shielding allows use of the speaker as close as 230 mm (9) to video monitors. The top-quality line distribution transformer, designed for minimal insertion loss and reduced saturation, allows use of either 70V or 100V distributed speaker lines. In bypass position, the 8Ω impedance allows use of multiple speakers on a loudspeaker line. 

Features

  • Extended bandwidth, extremely smooth frequency response.
  • 110° x 85° HF coverage, rotatable horn.
  • 110 W transformer for 70 V or 100 V lines, with 8 ohm thru.
  • SonicGuard™ overload protection.
  • 200 mm (8 in) Kevlar cone woofer,
    25 mm (1 in) titanium diaphragm compression driver.
  • Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and
    optional U-bracket.
  • Sealed input panel cover and screwdown input terminals.
Øystein Johnsen
SALG
Tlf: 23 23 28 07
Mob: 91 53 73 13
Frequency Range37 Hz –18 kHz (-10 dB)
Power Capacity300 W Continuous Program Power , 150 W Continuous Pink Noise
Transformer Taps70 V: 110 W, 55 W, 28 W & , 14 W 100 V: 110 W, 55 W, & , 28 W,
Thru Position: 8 ohms nominal
Frequency Response45 Hz – 18 kHz ( ± 3 dB)
Maximum SPL @ 1mShort-Term: 120 dB , Long-Term: 114 dB
Nominal Sensitivity90 dB (2.83V / 1m)
Nominal Coverage Angle110° H x 85° V, rotatable
Directivity Factor (Q)7.2 dB, averaged 500 Hz to 16 kHz
Directivity Index (DI)8.6 dB, averaged 500 Hz to 16 kHz
Nominal Impedance8 ohms
Minimum Impedance6.3 ohms @ 230 Hz
Crossover Network3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
Low Frequency200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
High Frequency25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
Enclosure MaterialHigh impact polystyrene
GrilleThermoset composite coated steel, WeatherMax multi-layer foam
Overload ProtectionFull-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
EnvironmentalIEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & , UV. Passes Mil-Std-202F for salt spray.
TerminationsScrew-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
Safety Agency RatingTransformer is listed per UL1876
ColorsBlack or white (-WH)
Dimensions (H x W x D)520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
Net Weight (ea)12.2 kg (26.8 lb.)
Shipping Weight (ea)14.0 kg (30.8 lb.)
Included Accessories1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
Optional AccessoriesMTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket
Spesifikasjoner for produktene
*
*
*
Kunder som kjøpte dette produktet, kjøpte også...

BSS BLU-BOB1 | Soundweb output expander m/BLU-LINK 1/2-rack

720-10151
The Soundweb London BLU-BOB1 or “break-out box” offers 8 channels of analog audio output expansion via the Soundweb London high bandwidth, fault tolerant digital audio bus.

BSS BLU RACK | rack kit for inntil 2 stk BLU-BIB / BLU-BOB 1U

720-19015
The BSS Audio 1U Rack-Mount Kit allows up to two half-rack Soundweb London devices—BLU-BIB and BLU-BOB1—to be mounted on a shelf occupying a single rack space.

BSS BLU-BIB | Soundweb input expander m/BLU-LINK 1/2-rack

720-10150
The Soundweb London BLU-BIB or “break-in box” offers 8 channels of analog audio input expansion via the Soundweb London high bandwidth, fault tolerant digital audio bus.
Filtrer
Sort
display