JBL Control 28-1 | 8" høyttaler 8ohm/70V/100V, sort

The Control® 28-1 is a two-way 8” speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors,

Fabrikant: JBL

LydRommet SKU: 800-00132

Fabrikantens SKU: Control 28-1

Spesifikasjoner for produktene

Lenke til vår leverandør:	https://jblpro.com/en-US/products/control-28-1

This makes Control 28-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required. The frequency response is extremely smooth, resulting in a very natural sound character, and the response extends down to 45 Hz, providing strong bass capability. The system is capable of handling 120 Watts continuous pink noise (240 Watts program) at its 8 ohm setting and is also equipped with a built-in 60 Watt 70V/100V multi-tap transformer for operation on distributed speaker lines. The combination of high sensitivity and power handling provides high Max SPL of 112 dB.

Features

Components:
• 8” woofer with woven fiberglass cone
• 1” PEI diaphragm tweeter with fluid cooling
Contemporary, high-design appearance
Built-in InvisiBall® mounting hardware*, plus available U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
120 Watt power handling (240 Watt program) in direct 8Ω setting, plus built-in 60 Watt 70V/100V multi-tap transformer.
High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.

Produktinfo
PRODUKTANSVARLIG
Spesifikasjoner
Spesifikasjoner
Kontakt oss
Vedlegg

Features

Components:
• 8” woofer with woven fiberglass cone
• 1” PEI diaphragm tweeter with fluid cooling
Contemporary, high-design appearance
Built-in InvisiBall® mounting hardware*, plus available U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
120 Watt power handling (240 Watt program) in direct 8Ω setting, plus built-in 60 Watt 70V/100V multi-tap transformer.
High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.

Øystein Johnsen

SALG

Tlf: 23 23 28 07

Mob: 91 53 73 13

e-post: oystein@lydrommet.no

	Frequency Range (-10 dB)	45 Hz to 20 kHz
	Frequency Response (+/-3 dB)	62Hz - 16 kHz
	Power Rating	240 W Continuous Program (2 hrs) 120 W (480W peak), Continuous Pink Noise (2 hrs) 90 W (360W peak) Continuous Pink Noise (100 hrs)
	Maximum Input Voltage	27.5 V RMS (2 hrs), 55.0 V peak
	Maximum SPL	112 dB ave. Continuous Pink Noise (118 dB peak)
	Sensitivity	91 dB, 1W/1m (ave. 100 Hz – 10 kHz)
	Coverage Angle	100° x 100°
	Directivity Factor (Q)	7.3 (averaged 1kHz – 16kHz)
	Directivity Index (DI)	8.3dB (averaged 1kHz – 16kHz)
	Nominal Impedance	8 ohms (THRU setting)
	Crossover Type	2nd order low-pass, 1st order high-pass, plus conjugate shaping
	Transformer Taps	70V: 60W, 30W, 15W, 7.5W 100V: 60W, 30W, 15W Insertion Loss: < ,0.94 dB at any tap setting Thru Setting: 8? nominal
	Recommended Protective High-Pass	45 Hz high-pass (24 dB/oct) for 8? operation plus 15W and 7.5W taps , 55 Hz for 30W tap , 65 Hz for 60W tap.
	Low Frequency Driver	200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
	High Frequency Driver	25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
	Enclosure Material	High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
	Grille	Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (& ,-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
	Installation	InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (& ,-WH) U-bracket. Secondary safety attachment loop point on back panel.
	Environmental	IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & , UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-28WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
	Termination	Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
	Agency Rating	ROHS-compliant , Transformer UL Recognized per UL1876
	Colors	Black (RAL9004) or white (-WH, RAL9016)
	Dimensions (H x W x D)	386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in) , 277 mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket.
	Net Weight	6.8 kg (15.0 lbs)
	Shipping Weight	15.4 kg (34 lbs) pair-packed (for 2 speakers)
	Included Accessories	InvisiBall™ wall-mounting system), 6 mm x 180 mm hex key
	Optional Accessories	MTC-28UB-1 – Yolk-type U-bracket (& ,-WH) MTC-28WMG-1 – WeatherMax grille with backing (& ,-WH) MTC-28/25CM – Ceiling-Mount InvisiBall adapter (& ,-WH)

Spesifikasjoner for produktene

Lenke til vår leverandør:	https://jblpro.com/en-US/products/control-28-1

Navnet ditt *

Din e-post *

Forespørsel *

Product Files

Kunder som kjøpte dette produktet, kjøpte også...

JBL MTC28UB-1 | U-brakett til Control 28-1, sort

801-05040

JBL Control 25-1L | 5,25" høyttaler 8ohm sort

800-00140

Compact 8-Ohm Indoor/Outdoor Background/Foreground Speaker

JBL MTC25UB-1 | U-brakett til Control 25-1, sort

801-05042

JBL Control HST | 5" + 2x tweeter, 160 x 150 graders spredning, sort

801-00602

The Control HST utilizes JBL’s patent-pending Hemispherical Soundfield Technology™ to achieve extremely wide coverage of the listening space along with eliminating the primary wall reflection that tends to cause inconsistent sound when speakers are attached to a wall.