JBL AWC62 | 6,5" coax, 120x120 horn, 175W, grå

The AWC62 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music-fill in a wide variety of applications
Loading...
Fabrikant: JBL
LydRommet SKU: 801-02608
Fabrikantens SKU: AWC62
Spesifikasjoner for produktene
Lenke til vår leverandør:https://jblpro.com/en-US/products/awc62
The AWC62 is comprised of a high-power coaxial 165 mm (6.5 in) low frequency driver and 25 mm (1 in) high frequency compression driver. The co-axial design utilizes a unique tapered pole-piece design and transitions to the cone of the low frequency driver as a large diameter pattern control horn for the high frequencies, both eliminating high-frequency beaming which is common among this category of speaker and extending pattern control to the lowest possible frequencies. 

Features

  • Highly weather-resistant IP56 rating.
  • Consistent 110° x 110° broadband pattern control.
  • Components:
    • 165 mm (6.5 in) woofer with Kevlar-reinforced cone and 38 mm (1.5 in) voice coil.
    • 25 mm (1 in) exit compression driver
  • Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • 175 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
  • High-power passive crossover network.
  • Overload protection.
  • 70 Hz – 18 kHz frequency response.
  • 120 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.
The AWC62 is comprised of a high-power coaxial 165 mm (6.5 in) low frequency driver and 25 mm (1 in) high frequency compression driver. The co-axial design utilizes a unique tapered pole-piece design and transitions to the cone of the low frequency driver as a large diameter pattern control horn for the high frequencies, both eliminating high-frequency beaming which is common among this category of speaker and extending pattern control to the lowest possible frequencies. 

Features

  • Highly weather-resistant IP56 rating.
  • Consistent 110° x 110° broadband pattern control.
  • Components:
    • 165 mm (6.5 in) woofer with Kevlar-reinforced cone and 38 mm (1.5 in) voice coil.
    • 25 mm (1 in) exit compression driver
  • Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • 175 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
  • High-power passive crossover network.
  • Overload protection.
  • 70 Hz – 18 kHz frequency response.
  • 120 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.
Øystein Johnsen
SALG
Tlf: 23 23 28 07
Mob: 91 53 73 13
Frequency Range (-10 dB)70 Hz – 18 kHz
Frequency Response (±3 dB)100 Hz – 16 kHz
Coverage Pattern110º x 110º
Directivity Factor7.2 (1 k – 16 kHz)
Directivity Index (DI)7.9 dB (1 k – 16 kHz)
Long-Term System Power Rating (IEC)175 W 2 hrs.
120 W 100 hrs
Sensitivity (2.83V @ 1m)92 dB (Ave. 100 Hz – 18 kHz)
Maximum SPLDirect 8?: 114 dB (peaks of 120 dB)
120 W Tap: 112 dB
Crossover Network1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 3rd order low-pass to LF
Nominal Impedance8 ohms
Transformer Taps70V: 120W, 60W, 30W, 15W
100V: 120W, 60W, 30W
Low Frequency DriverKevlar-reinforced cone with weather treatment, 38 mm (1.5 in) voice coil.
High Frequency Driver25 mm (1 in) diaphragm and voice coil diameter
HF Driver ProtectionMinimum audibility SonicGuard™ HF overload protection
EnclosureABS with Glass enclosure
AttachmentTwo M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
GrilleCorrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Input ConnectionCE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round- jacketed cables with outside diameters between 4.0 mm (0.16”) and 9.0 mm (0.36”).
EnvironmentalIP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & , UV, and ASTM G85 for salt spray (168 hrs).
Dimensions259 x 259 x 255 mm (10.2 x 10.2 x 10.1 in), cabinet
288 mm (11.4 in) including gland nut
309 mm (12.2 in) including bracket extending to back
ColorsAvailable in gray (similar to Pantone 420C) and black (-BK)
Net Weight6.8 kg (15.0 lb), 7.7 kg (17.0 lb) with U-bracket
Shipping Weight8.8 kg (19.5 lb)
Included AccessoriesU-bracket, matches loudspeaker color (gray or black), zinc-rich extra thick powder coated, steel.
Spesifikasjoner for produktene
Lenke til vår leverandør:https://jblpro.com/en-US/products/awc62
*
*
*
Kunder som kjøpte dette produktet, kjøpte også...

JBL AWC129 | 12" coax, 90x90 horn, 400W, grå

801-02602
The AWC129 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music in a wide variety of applications

Sennheiser ADP UHF | passiv bladantenne, 470 - 1075 MHz

650-07105
Passive external directional antenna
Filtrer
Sort
display