JBL Control 52 | 2.5" satelitthøyttaler til C50ST og 40CST subbass, hvit

Control 52 satelitthøyttaler med 2,4 (60mm) driver. Benyttes sammen med C50S/T eller 40CS/T subbass.

Fabrikant: JBL

LydRommet SKU: 801-00401

Fabrikantens SKU: Control 52-WH

Veggbrakett er inkludert.

Kunder som kjøpte dette produktet, kjøpte også...

Crown CDi4|300 | installasjonsforsterker 4 x 300W

741-00012

The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance , rich feature set, and competitive cost. , Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. , Designed for ease-of-use in a variety of applications, the 4|300 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. , The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

Produktinfo
PRODUKTANSVARLIG
Spesifikasjoner
Kontakt oss

Veggbrakett er inkludert.

Øystein Johnsen

SALG

Tlf: 23 23 28 07

Mob: 91 53 73 13

e-post: oystein@lydrommet.no

	Frequency Range (-10 dB)	140 Hz – 20 kHz
	Frequency Response (±3 dB)	180 Hz – 17 kHz
	Power Capacity	50 Watts Continuous Program Power (2 hrs) 25 Watts Continuous Pink Noise (2 hrs) 30 Watts Continuous Program Power (100 hrs) 15 Watts Continuous Pink Noise (100 hrs)
	Nominal Sensitivity	85 dB (4.0V/1m = 1W) 82 dB (2.83V, 1m)
	Nominal Coverage Angle	150° x 150° (omnidirectional)
	Rated Maximum SPL (1m)	94 dB average, 100 dB peak
	Nominal Impedance	16 ohms
	Transducer Driver	60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex® former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension.
	Input Connector	Removable locking 2-pin connector with screw-down terminals. Max wire 12 AWG (2.5 mm²)
	Material	High impact polystyrene, painted zinc-plated metal grille.
	Dimensions (H x W x D)	Cabinet: 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in) Wall bracket: 51 mm (2.0 in)
	Net Weight	0.7 kg (1.5 lbs)
	Shipping Weight	0.8 kg (1.8 lbs)
	Included Accessories	Wall bracket (both speaker and wall parts), 2-pin locking connector.

Navnet ditt *

Din e-post *

Forespørsel *