JBL Control 18CT | 8" coax, 70/100V, hvit

Fabrikant: JBL
LydRommet SKU: 801-00020
Fabrikantens SKU: CONTROL 18C/T
Øystein Johnsen
Tlf: 23 23 28 07
Mob: 91 53 73 13
Frequency Range (-10 dB)158 Hz – 20 kHz
Frequency Response (±3 dB)180 Hz – 16 kHz
Power Capacity (at low-Z) 2180 Watts Continuous Program Power
Maxium Input Voltage31.8 V RMS (2hrs), 63.6 V peak
Nominal Sensitivity392 dB
Nominal Coverage Angle390° conical coverage
Directivity Factor (Q) 36.0
Directivity Index (DI) 37.8 dB
Rated Maximum SPL112 dB @ 1 m (3.3 ft) average, 118 dB peak
Nominal Impedance8 ohms (in direct/bypass 8? setting)
Transformer Taps60 W, 30 W, 15 W @ 70V or 100V (plus 7.5 W @ 70V only)
Recommended Protective High-Pass445 Hz high-pass (24 dB/oct) for 8ohm operation, 60 Hz for 60 W tap, 50 Hz for 30 W, 15 W & , 7.5 W tap setting
Crossover Network12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver
LF Driver200 mm (8.0 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil
HF Driver25 mm (1.0 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide
Input ConnectorRemovable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm2)
Connector WiringPin 1 = + In , Pin 2 = - In , Pin 3 = + Loop Thru , Pin 4 = - Loop Thru
Strain ReliefsStrain relief for two cables or two flex conduits via coupled clamping mechanism
MaterialsABS baffle with UL94-V0 and UL94-5VB flame class fire rating , Zinc-plated steel backcan
Safety AgencyUL1480, UL2043, NFPA90 & , NFPA70 , S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker , Transformer UL registered per UL1876 , ROHS, C-tick N108, CE compliant , Baffle meets UL94-V0 and UL94-5VB flammability rating , In accordance with IEC60849/EN60849 systems
Dimensions307 mm diameter x 274 mm depth from back of baffle (12.1 in diameter x 10.8 in depth)
Ceiling Cutout SizeCircular cutout with 282 mm (11.1 in) diameter (cardboard cutout template included)
Ceiling Thickness RangeUp to 38 mm (1.5 in) with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 60 mm (2.4 in) ceiling thicknesses
Safety Seismic AttachmentOne point, top surface
Net Weight6.4 kg (14.1 lbs, one speaker)
Shipping Weight17.7 kg (39.0 lbs, pair in master carton)
Included AccessoriesC-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans , optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, removable locking multi-pin connector, grille with safety tether.
Optional AccessoriesMTC-47NC new construction bracket , MTC-47MR mud-ring construction bracket , MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 60 mm (2.4 in, ordering one set = 24 dogears for 6 speakers) , MTC-48TR tile rail for 1200 mm (4 ft) tile spans
Kunder som kjøpte dette produktet, kjøpte også...

JBL Control 16CT | takhøyttaler, 6.5" coax, hvit

Takhøyttaler med 6.5 coaxdriver i kabinett med 70/100V trafo.

Crown CDi2|600 | installasjonsforsterker 2 x 600W

The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance , rich feature set, and competitive cost.  , Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|600 offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more.  , Designed for ease-of-use in a variety of applications, the 2|600 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer.  , The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

JBL Control 40CST PL | tak-innfellingssub med x-over for C42C, 70/100V

8 Subwoofer til bruk sammen med Control 42C