LEA Connect 352D | installasjonsforsterker 2 x 350W, WiFi, Dante

Beklager-dette produktet er ikke lenger tilgjengelig

2-kanals klasse-D forsterker med mulighet for 70V/100V og overvåking/styring over WiFi. Innebygget DSP (96 kHz) og Dante.
Loading...
LydRommet SKU: 699-00053
Fabrikantens SKU: CS352D

LEA Connect 352D kombinerer IoT – «the internet of things», med profesjonelt forsterkerdesign. Brukergrensesnittet er web-basert, og kan aksesseres på tre måter: via innebygget WiFi aksesspunkt, husets WiFi eller LAN.

Dette muliggjør også overvåking og styring av forsterkerne via «LEA PROFESSIONAL CLOUD» – uten behov for VPN til husets LAN. Dette forenkler tidstyver som feilsøking og support, og gjør at du kan være i forkant av eventuelle problemer som skulle oppstå.

Last ned høyttaler-presets her


SPESIFIKASJONER:

Audio SpecInputsAnalog: Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity (2CH = 2 inputs, 4CH = 4 inputs, 8CH = 8 inputs)
Dante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast
AES 67: Configurable via the Dante Controller Software
THD+N0.1% (20Hz to 20kHz)
Frequency Response20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
Signal to Noise Level105dB (20Hz to 20kHz referenced to 8Ω)
Crosstalk70dB (20Hz to 20kHz)
Amplifier Output ClassificationClass D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
DSPDSP ArchitectureAnalog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
Input MatrixRoutable matrix; any input to any output with primary and secondary input priority
CrossoversUp to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
Parametric EQ8 Band Parametric EQ per channel
Output Delay100ms per channel
Output ProtectionDC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
User Adjustable LimitingPeak Voltage and RMS Voltage
Load MonitoringRealtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
Control, Monitoring, NetworkUser InterfaceWeb Browser User Interface, 3rd Party API control, or CLOUD control
External I/OExternal I/O In: Toggles Remote On/Off
External I/O Out: Indicates Amplifier Health
OperationAC Mains100VAC - 240VAC +/- 15% 50Hz or 60Hz
Power SupplyUniversal Switch Mode Power Supply with Power Factor Correction (No PFC in 84D, 164D, 88D, & 168D)
Physical SpecDimensions (L x W x H)Product: 14.25” x 19” x 1U (362mm x 482mm x 1U) x 1U (362mm x 482mm x 1U)
Shipping: 20” x 22.75” x 3.75” (508mm x 578mm x 95.25mm)
Weight352D & 702D: 10lbs / 3.4kg | Shipping: 17.4lbs / 7.9kg
354D & 704D: 14lbs / 4kg | Shipping: 18.7lbs / 8.5kg
84D & 164D: 12.3lbs / 5.58kg | Shipping: 16.6lbs / 7.53kg
88D & 168D: 13.6lbs / 6.17kg | Shipping: 18lbs / 8.16kg
CoolingFront to Rear Variable Fan Speed Cooling
Fan Noise at idle is 50dB @ 1m
Fan Noise at 50% is 57dB @1m
Fan Noise at full speed is 63dB @ 1m

LEA Connect 352D kombinerer IoT – «the internet of things», med profesjonelt forsterkerdesign. Brukergrensesnittet er web-basert, og kan aksesseres på tre måter: via innebygget WiFi aksesspunkt, husets WiFi eller LAN.

Dette muliggjør også overvåking og styring av forsterkerne via «LEA PROFESSIONAL CLOUD» – uten behov for VPN til husets LAN. Dette forenkler tidstyver som feilsøking og support, og gjør at du kan være i forkant av eventuelle problemer som skulle oppstå.

Last ned høyttaler-presets her


SPESIFIKASJONER:

Audio SpecInputsAnalog: Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity (2CH = 2 inputs, 4CH = 4 inputs, 8CH = 8 inputs)
Dante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast
AES 67: Configurable via the Dante Controller Software
THD+N0.1% (20Hz to 20kHz)
Frequency Response20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
Signal to Noise Level105dB (20Hz to 20kHz referenced to 8Ω)
Crosstalk70dB (20Hz to 20kHz)
Amplifier Output ClassificationClass D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
DSPDSP ArchitectureAnalog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
Input MatrixRoutable matrix; any input to any output with primary and secondary input priority
CrossoversUp to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
Parametric EQ8 Band Parametric EQ per channel
Output Delay100ms per channel
Output ProtectionDC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
User Adjustable LimitingPeak Voltage and RMS Voltage
Load MonitoringRealtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
Control, Monitoring, NetworkUser InterfaceWeb Browser User Interface, 3rd Party API control, or CLOUD control
External I/OExternal I/O In: Toggles Remote On/Off
External I/O Out: Indicates Amplifier Health
OperationAC Mains100VAC - 240VAC +/- 15% 50Hz or 60Hz
Power SupplyUniversal Switch Mode Power Supply with Power Factor Correction (No PFC in 84D, 164D, 88D, & 168D)
Physical SpecDimensions (L x W x H)Product: 14.25” x 19” x 1U (362mm x 482mm x 1U) x 1U (362mm x 482mm x 1U)
Shipping: 20” x 22.75” x 3.75” (508mm x 578mm x 95.25mm)
Weight352D & 702D: 10lbs / 3.4kg | Shipping: 17.4lbs / 7.9kg
354D & 704D: 14lbs / 4kg | Shipping: 18.7lbs / 8.5kg
84D & 164D: 12.3lbs / 5.58kg | Shipping: 16.6lbs / 7.53kg
88D & 168D: 13.6lbs / 6.17kg | Shipping: 18lbs / 8.16kg
CoolingFront to Rear Variable Fan Speed Cooling
Fan Noise at idle is 50dB @ 1m
Fan Noise at 50% is 57dB @1m
Fan Noise at full speed is 63dB @ 1m
*
*
*
Kunder som kjøpte dette produktet, kjøpte også...

JBL Control 18CT | 8" coax, 70/100V, hvit

801-00020
Control 18C/T is a full-range ceiling speaker consisting of a 200 mm (8.0 inch) high tech cone driver and a 25 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blind-mount backcan for quick and easy installation.

Sennheiser CHG 2 | Ladestasjon med 2 plasser for SK/SKM D1, SK/SKM AVX, SL DW, BA 10, BA 30

650-02762
2-bay table top charger with power supply for the evolution wireless D1 series and SpeechLine. The CHG 2 charger makes battery management for two batteries really easy.

Sennheiser SL Bodypack HM 1 | SpeechLine lommesender, inkl HM 1

650-00356
Kit with SL Bodypack DW and SL Headmic 1 SB an extremely unobtrusive and comfortable-to-use headworn microphone. Dedicated to Speech.
Filtrer
Sort
display