JBL CBT200LA-1 | passiv kolonnehøyttaler med 32 stk 2" elementer, sort

Den patenterte CBT teknologien gir høyttaleren meget jevn frekvensrespons innenfor sitt dekningsområde og reduserer lobing utenfor.
Loading...
Fabrikant: JBL
LydRommet SKU: 801-01008
Fabrikantens SKU: CBT 200LA-1

Høyttalerens vertikale spredning kontrolleres med et avansert passivt filter som gir hvert element i kolonnen riktig nivå og fase.

Den vertikale spredningen kan settes til 15 grader eller 30 grader. De to seksjonene kan justeres individuelt, slik at den vertikale spredningen kan gjøres asymmetrisk. Man kan f.eks. sette den øverste seksjonen til Narrow slik at lyden kastes langt bakover, og den nederste seksjonen kan settes på Broad for å dekke større område nærmere høyttaleren.

Den innebygde EQ'en gir enten en flat respons til musikkbruk, eller et løft i presensområdet for talebruk.

100V trafo eller direkte 8 ohms tilkopling (separat for de to seksjonene).  ,
Veggbrakett med justerbar tilt er inkludert.  ,
Brakett for flush montering er tilleggsutstyr.

  ,

    Høyttalerens vertikale spredning kontrolleres med et avansert passivt filter som gir hvert element i kolonnen riktig nivå og fase.

    Den vertikale spredningen kan settes til 15 grader eller 30 grader. De to seksjonene kan justeres individuelt, slik at den vertikale spredningen kan gjøres asymmetrisk. Man kan f.eks. sette den øverste seksjonen til Narrow slik at lyden kastes langt bakover, og den nederste seksjonen kan settes på Broad for å dekke større område nærmere høyttaleren.

    Den innebygde EQ'en gir enten en flat respons til musikkbruk, eller et løft i presensområdet for talebruk.

    100V trafo eller direkte 8 ohms tilkopling (separat for de to seksjonene).  ,
    Veggbrakett med justerbar tilt er inkludert.  ,
    Brakett for flush montering er tilleggsutstyr.

      ,

      Øystein Johnsen
      SALG
      Tlf: 23 23 28 07
      Mob: 91 53 73 13
      ComponentsThirty-two 50 mm (2 in) Full-Range Drivers
      Frequency Range (-10 dB)80 Hz – 20 kHz
      Frequency Response (±3 dB)130 Hz – 18 kHz (narrow coverage, music mode setting)
      Coverage - VerticalNarrow Mode:
      15° (500 Hz – 16 kHz, +15°/-2° [< ,60° down to 220 Hz, < ,90° down to 140 Hz])
      Broad Mode:
      30° (400 Hz – 12 kHz, +15°/-8°, [< ,60° down to 220 Hz, < , 90° down to 140 Hz])
      Asymmetrical Progressive-Gradient Mode:
      (Top speaker module set at “Narrow” and bottom speaker module at “Broad”, for “J-type” coverage, sending higher sound levels toward the far area of the listening space): 22.°(+7° from aiming axis up , -15° from aiming axis down, 300 Hz – 12 kHz, +15°/-8°, [< ,60° down to 220 Hz, < ,90° down to 140 Hz])
      Coverage - Horizontal150° (ave, 1 kHz – 4 kHz, ±20°)
      Sensitivity - Narrow(speech mode): 95 dB (2 kHz – 5 kHz)
      (music mode): 92 dB (150 Hz – 18 kHz)
      Sensitivity - Broad(speech mode): 93 dB (2 kHz – 5 kHz)
      (music mode): 90 dB (150 Hz– 18 kHz)
      Sensitivity - Asymmetrical Progressive-Gradient Mode
      (on-axis)
      (speech mode): 94 dB (2 kHz – 5 kHz)
      (music mode): 91 dB (150 Hz – 18 kHz)
      Nominal Impedance (direct)8? per half (top and bottom) for 4 ohms total (in thru mode).
      Min-Z for system = 2.9?.
      HookupEnsure identical polarity of hookup – for proper functioning, the two loudspeaker modules (top and bottom) must be hooked up in same polarity. Parallel hookup at the two sets of back panel input terminals is recommended.
      Power Capacity (thru setting)650W (2600W peak), 2 hrs
      400W (1600W peak) 100 hrs
      Max SPL - Narrow(speech mode): 123 dB cont ave (129 dB peak)
      (music mode): 120 dB cont ave (126 dB peak)
      Max SPL - Broad(speech mode): 121 dB cont ave (127 dB peak)
      (music mode): 118 dB cont ave (124 dB peak)
      Max SPL - Asymmetrical Progressive-Gradient Mode
      (on-axis)
      (speech mode): 122 dB cont ave (128 dB peak)
      (music mode): 119 dB cont ave (125 dB peak)
      70V/100V Transformer TypeSet individually per speaker module (top and bottom): 120W, 60W, 30W (15W at 70V only), and direct 8?, via switch. Total (with top & , bottom set to same): 240W, 120W, 60W (30W at 70V only) and direct 4?. Max. insertion loss less than 1 dB at any tap.
      EnclosureFiberglass reinforced ABS cabinet, painted aluminum grille
      ConnectorsTwo (one for top half and one for bottom half), screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), or bare wire (up to 12 AWC/2.5 mm2)
      Outdoor CapabilityIP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.
      ColorsBlack or White (-WH)
      ConfigurationTwo pieces (top and bottom half), each 100 cm tall, connected together via Coupler Plate. Top/bottom orientation of each piece must be observed.
      Insert Points28 M6 insert points on back panel (36 total with 8 center points being utilized by the Coupler Plate).
      MountingIncluded swivel (pan) / tilt wall bracket (must be mounted to threaded points on Coupler Plate) provides continuously variable ±80° left-right swivel aiming (at up to ±5° up/down tilt), continuously adjustable ±10° up/down tilt, as well as 5° fixed increment tilt angles to ±10°. Twenty-eight available threaded mounting points (M6 diameter x M1 thread pitch x 17 mm deep) located on back panel. Threaded mounting points can be utilized for suspension. Compatible with OmniMount 30.0 brackets
      Dimensions (H x W x D)2000 x 98.5 x 153 mm (78.8 x 3.8 x 6.0 in)
      Net Weight14.6 kg (33 lb)
      Included AccessoriesSwivel (pan) / tilt wall bracket, Coupler plate
      Optional AccessoriesMTC-PC2 terminal panel cover
      MTC-CBT-FM1 flush-mount low-profile wall-mount bracket (2 pieces required)
      MTC-CBT-SMB1 stand-mount bracket for use with 35 mm speaker stands (heavy duty stand required)
      *
      *
      *
      Filtre
      Sort
      display