JBL AWC82 | 8" coax, 120x120 horn, 250W, grå

The AWC82 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music-fill in a wide variety of applications
Loading...
Fabrikant: JBL
LydRommet SKU: 801-02600
Fabrikantens SKU: AWC82
Spesifikasjoner for produktene
Lenke til vår leverandør:https://jblpro.com/en-US/products/awc82
The AWC82 is comprised of a high-power coaxial 200 mm (8 in) low frequency driver and 25 mm (1 in) high frequency compression driver. The co-axial design utilizes a unique tapered polepiece design and transitions to the cone of the low frequency driver as a large diameter pattern control horn for the high frequencies, both eliminating high-frequency beaming which is common among this category of speaker and extending pattern control to the lowest possible frequencies.

Features

  • Highly weather-resistant IP56 rating
  • Consistent 120° x 120° broadband pattern control
  • Components:
    • 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil.
    • 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.
  • Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
  • High-power passive crossover network.
  • Overload protection
  • 80 Hz – 20 kHz frequency response.
  • 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.
The AWC82 is comprised of a high-power coaxial 200 mm (8 in) low frequency driver and 25 mm (1 in) high frequency compression driver. The co-axial design utilizes a unique tapered polepiece design and transitions to the cone of the low frequency driver as a large diameter pattern control horn for the high frequencies, both eliminating high-frequency beaming which is common among this category of speaker and extending pattern control to the lowest possible frequencies.

Features

  • Highly weather-resistant IP56 rating
  • Consistent 120° x 120° broadband pattern control
  • Components:
    • 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil.
    • 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.
  • Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
  • High-power passive crossover network.
  • Overload protection
  • 80 Hz – 20 kHz frequency response.
  • 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.
Øystein Johnsen
SALG
Tlf: 23 23 28 07
Mob: 91 53 73 13
Frequency Range (-10 dB)80 Hz – 20 kHz
Frequency Response (±3 dB)100 Hz – 20 kHz
Coverage Pattern120° x 120°
Directivity Factor (Q)8.1 (1 k – 16 kHz)
Directivity Index (DI)8.4 dB (1 k – 16 kHz)
Long-Term System Power Rating (IEC)250 W 2 hrs.
200 W 100 hrs
Sensitivity (2.83V @ 1m)94 dB (Ave. 100 Hz – 20 kHz)
Maximum SPLDirect 8?: 118 dB (peaks of 124 dB)
200 W Tap: 117 dB
Crossover Network1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order
low-pass to LF
Nominal Impedance8 ohms
Transformer Taps70V: 200W, 100W, 50W, 25W
100V: 200W, 100W, 50W
Low Frequency DriverKevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
High Frequency Driver25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
HF Driver ProtectionMinimum audibility SonicGuard™ HF overload protection
EnclosureABS with Glass enclosure, heavily braced
AttachmentTwo M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
GrilleCorrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Input ConnectionCE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
Environmental IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & , UV, and ASTM G85 for salt spray (168 hrs).
Dimensions 300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet
331 mm (13.0 in) including gland nut
359 mm (14.2 in) including bracket extending to back
ColorsAvailable in gray (similar to Pantone 420C) and black (-BK)
Net Weight9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Shipping Weight14.1 kg (31.0 lb)
Included AccessoriesU-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.
Spesifikasjoner for produktene
Lenke til vår leverandør:https://jblpro.com/en-US/products/awc82
*
*
*
Kunder som kjøpte dette produktet, kjøpte også...

JBL AWC129 | 12" coax, 90x90 horn, 400W, grå

801-02602
The AWC129 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music in a wide variety of applications

JBL Control 24CT MICRO | takhøytaler 4", 70/100V

801-00010
The Control 24CT Micro is a compact in-ceiling speaker, providing full, high quality sound for background music and music-plus-paging systems.
Filtrer
Sort
display