JBL AM5215/95 høyttaler med 15" i 90°x50° horn, WRC

Spesifikasjoner:

• Frequency Range (-10 dB):  35 Hz – 20 kHz
• Frequency Response (±3 dB):  41 Hz – 18 kHz
• Coverage Pattern: 90° x 50°, rotatable waveguide
• Directivity Factor (Q): 11.6
• Directivity Index (DI): 10.6 dB
• Crossover Modes: Bi-amp/Passive switchable
• Passive Crossover Frequency:  1.8 kHz
• Transducer Power Rating (AES):
  LF: 500 W (2000 W peak), 2 hrs
  350 W (1400 W peak), 100 hrs
  HF: 40 W (160 W peak), 2 hrs
• Long-Term System Power Rating (IEC): Passive mode: 350 W (1400 W peak), 100 hrs
• Maximum SPL:
  Bi-amp mode:
  LF: 125 dB-SPL cont avg (131 dB peak)
  HF: 129 dB-SPL cont avg (135 dB peak)
  Passive mode:
  124 dB-SPL cont avg (130 dB peak)
• System Sensitivity (1W @ 1m): Passive mode: 98 dB SPL
• Low Frequency Driver: 1 x JBL 265H-1 380 mm (15 in ) driver with 50.8 mm (2 in) dual voice coil
• Nominal Impedance: 8 ohms
• Sensitivity (1W @ 1m, within operational band): 99 dB SPL
• High Frequency Driver: JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil
• Nominal Impedance: 8 ohms
• Sensitivity (1W @ 1m):  113 dB SPL
• Waveguide: PT-H95HF-1
• Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood
• Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware
• Finish: Black DuraFlex™ finish.
  White available upon request.
• Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
• Input Connector:  NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
• Environmental Specifications:  Mil-Std 810; IP-x3 per IEC529.
• Dimensions (H x W x D in vertical cabinet orientation):  783 x 422 x 504 mm
• Net Weight: 25.0 kg
• Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1